Battery Not Detecting Charger. To force the battery to be in charging mode, press the battery button once and then immediately press and hold it down. Each LED will turn on until they’re all on. Once they are all on, some will turn off and then the current battery charge level will be displayed. Plug the battery into the charger. Phantom 4 will work with most models of the GL300 controller but if you your new one is the GL300E or GL300F there is an additional step before linking. From the camera screen, under the three dots menu in the upper left corner: Remote Controller Settings>Advanced Settings>Remote Controller Type>Phantom 4. Droneted and. Credits: DJI Support. Open the DJI GO app and select the Aircraft and tap camera view. Credits: DJI Support. Go to the main menu and go to remote controller settings. Then scroll down and tap on the “Linking RC”. Then the remote controller will start beeping. Credits: DJI Support. Then tap “OK”. Credits: DJI Support. Connect the DJI USB cable from your camera to your remote controller. Remove the props from your Phantom. Power on your Phantom. To do so, press and release the battery button quickly – and, then immediately press and hold it in for 2 seconds. 31) Turn the remote controller on and wait for the update to begin. Downgrade Controller firmware per instructions, from 1.9.3 to 1.8.0+-- Did not resolve the issue- camera still pans left and right and will not tilt up or down using scroll wheel. (Sigh) -- I know this has to be a firmware issue. This aircraft has never crashed or even had a hard landing and the tilt will still work with and finger touch on the 7#. DJI Susan Posted at 2018-5-29 01:52. Please refer below and try several times: Turn on the RC, hold C1, C2 and shutter button at the same time, then connect the App again to see whether it works. View full quote. Hi, Susan. I have been quite happy with Phantom 3 Pro, untill it made update. Phantom 3 1.2.6/1.2.8 Firmware Update Issues and Resolutions At DJI we are dedicated to creating the world’s most advanced flying platforms and camera stabilization systems. This dedication extends to ourdesire to provide quality products that meet and exceed the needs of our customers. Recently however, we have had reports of a number of issues arising from our latest firmware upgrade DJI Phantom 3 Professional (White) at Amazon for $1,996.86 The Phantom 3 is available in two versions – Professional and Advanced, with the only difference between the two being the camera. Vay Tiền Nhanh Chỉ Cần Cmnd.

dji phantom 3 professional camera not working